HIROSE ELECTRONIC Steckverbinder für Platinen（paßender Sift / Kontakt：Stecker (Stecker)）

?* Informationen zur Lieferzeit und Preisen

• 

  EnerBee Platine-zu-Kabel-Steckverbinder mit Verriegelung, Serie DF33C

  HIROSE ELECTRONIC

  Maximum 5 A. 3.3mm pitch. Satisfies the criteria of the Electrical Appliances and Material Safety Act: Creepage distance: 1.5 mm (resin filling) Widely used as a compact internal power supply connector.

  • Mengenrabatt

  ab∗ ：	0.16 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Platine-Steckverbinder (0,5 mm Rastermaß und 4 bis 5 mm Höhe) – Serie FX10

  HIROSE ELECTRONIC

  [Features]
  · Board-to-board connector with a ground plate, height between boards depends on application (4 to 5 mm) and whether or not to use a ground plate is selectable.
  Some in-stock items are custom products, therefore returns and cancellations are not possible.

  • Mengenrabatt

  ab∗ ：	3.30 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  CF-Karten-Steckverbinder Serie MI20 / 21

  HIROSE ELECTRONIC

  This is a CF card connector. Wide variety available to suit different applications, with differing mount orientation, standoff inclusion, ejector button, and supported cards.

  • Mengenrabatt

  ab∗ ：	3.73 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Platine-Steckverbinder (0,6 mm Rastermaß, 5 bis 16 mm Höhe) – Serie FX8C

  HIROSE ELECTRONIC

  The height between boards can be selected from 5 to 16 mm. Although it is compact, it has a guiding mechanism to improve operability. Can use for a wide range of equipment.
  
  [Features]
  · Stacking height 3 mm to 16 mm compatible.
  · Stacking height between boards of 3 mm to 16 mm is applicable.
  ▪ SMT co‐planarity.
  ▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm or less.
  · Fit guiding.
  · Although very small in size, importance is placed on fit operability by providing a guiding rib with a self-alignment of ± 0.6 mm.
  · Protects against incorrect insertion into the circuit board.
  · Equipped with a circuit board positioning boss, which prevents incorrect insertion into the circuit board by leveraging the position and diameter of the boss.
  · Two-part integrated product.
  · This novel, two-piece integrated product is available for all terminal pin number configurations and makes it possible to maintain mounting position accuracy. This is achieved by consolidating two connectors using a unique method, which improves fitting reliability when using two fine-pitch connectors. (The standard fitting pitch between the two rows for the two-piece integrated version is 11 mm.)
  
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  ab∗ ：	2.79 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN12

  HIROSE ELECTRONIC

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  • Mengenrabatt

  ab∗ ：	3.13 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Platine-Steckverbinder mit 0,5 mm Rastermaß und 2 bis 3 mm Höhe, Serie FX11

  HIROSE ELECTRONIC

  [Features]
  · A board-to-board connector with a ground plate.
  · Select with/without the ground plate and also the height of the board spacing (2–3 mm) to match the application.

  • Mengenrabatt

  ab∗ ：	3.30 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stiftleiste mit 2,54 mm Rastermaß (zweireihige Klemmen) , Serie A1

  HIROSE ELECTRONIC

  2.54-mm pitch pin header terminal 2 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
  
  [Features]
  · High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
  · Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
  · Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF4H (receptacle) for a wide range of use.

  • Mengenrabatt

  ab∗ ：	0.56 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Kabel-Steckverbinder mit Verriegelung, 7,92 mm Rastermaß – Serie DF22【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  [Features]
  · Cable connector for board-to-cable and cable-to-cable connections. Supports 30 maximum amperes.
  · Equipped with a lock mechanism and mechanism for preventing incorrect insertion to ensure safety.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Mengenrabatt

  ab∗ ：	0.30 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Platine-Steckverbinder mit 0,5 mm Rastermaß und 3 bis 5 mm Höhe – Serie DF12

  HIROSE ELECTRONIC

  Connector for board to board connection with 0.5-mm pitch. Select the distance 3 mm to 5 mm between circuit boards by combining header and receptacle.
  
  [Features]
  · Available in a variety of board spacing dimensions.
  · In addition to ultra-small 0.5-mm pitch size, 3-mm, 3.5-mm, 4-mm, and 5-mm board spacing dimensions are available.
  · Supports automatic mounting.
  · The connector has an absorption surface. Therefore, automatic mounting by embossed packing is possible.
  · Equipped with reinforcement hardware for soldered joints.
  · Products with attached reinforcement hardware to prevent solder peeling are also available for mounting to FPCs.
  
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  ab∗ ：	3.61 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Platine-Steckverbinder mit 0,5 mm Rastermaß und 4 bis 8 mm Höhe – Serie DF17

  HIROSE ELECTRONIC

  Connector for board to board connection with 0.5-mm pitch. Select the distance 4mm to 8mm between circuit boards by combining header and receptacle.
  In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.

  • Mengenrabatt

  ab∗ ：	7.59 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Platine-Steckverbinder mit 0,6 mm Rastermaß und 3 bis 4 mm Höhe – Serie FX8

  HIROSE ELECTRONIC

  The height between boards can be selected from 3 to 4 mm. Although it is compact, it has a guiding mechanism to improve operability. Can be used for a wide range of equipment.
  
  [Features]
  · Stacking height 3 mm to 16 mm compatible.
  · Stacking height between boards of 3 mm to 16 mm can be applied.
  ▪ SMT co‐planarity.
  ▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm max.
  · Fit guiding.
  · Equipped with latching guiding ribs while being extremely small, the self-alignment tolerance of ±0.6 mm has been given much attention.
  · Prevents mis-insertion with circuit boards.
  · By placing circuit board positioning screws, mis-insertion to the circuit board is prevented based on the screw location and diameter.
  ・2-Piece Unit.
  ・With 2 fine-pitch connector units used for increased connection reliability, we offer a unique 2-connection method for each terminal as a new way to ensure highly accurate mounting (standard 11 mm connection pitch between the 2 arrays in the 2-piece unit).

  • Mengenrabatt

  ab∗ ：	1.87 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Platine-Steckverbinder mit 0,8 mm Rastermaß und 5 bis 9 mm Höhe, Serie FX6

  HIROSE ELECTRONIC

  The height between boards can be selected from 5 to 9 mm. With a long mating length and large self-alignment volume while maintaining a small size, this product offers high connection reliability.
  
  [Features]
  · Compatible with 5 mm to 9 mm stacking height.
  · The stacking height between circuit boards is set at between 5 and 9 mm. in 1 mm increments.
  · Long effective mating length of 1.7 mm.
  · A long and spacious effective mating length of 1.7 mm even with RoPro connectors.
  · Fit guiding.
  · A ±1 mm self alignment and large guiding volume makes for easy mating.
  · Supports automatic mounting.
  ·In consideration of automatic mounting, and using stick packaging for standard packaging specifications, units with less than 80 pins are available for emboss packaging (however the product has an 80-pin limit).
  ▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.

  • Mengenrabatt

  ab∗ ：	1.50 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Platine-Steckverbinder mit 1,27 mm Rastermaß und 5 bis 11 mm Höhe – Serie FX4

  HIROSE ELECTRONIC

  Board-to-board connector with half pitch. DIP circuit board mounting method; choose from a 5 to 11 mm mating height.
  
  [Features]
  ·The FX4 series is a small-type board-to-board connector able to be set at a stacking height of 1 mm.
  ●Dip Timer.
  1. Small and Lightweight.
  ・Mounting space and weight are the same as the prior products (FX2 series).
  ・Approx. 30% in comparison, mounting area is approx. 70% of prior product.
  2. · Compatible with 5 mm to 11 mm stacking height.
  · The stacking height between circuit boards is set at between 5 and 11 mm. in 1 mm increments.
  3. Prevention of flux oozing.
  · Prevents flux oozing during circuit board dip soldering.
  4. Construction that prevents mis-insertion and reduces the required insertion/extraction force.
  · The mating portion is constructed to completely prevent mis-insertion. It also utilizes a construction that reduces the amount of force required to insert and extract the connector.

  • Mengenrabatt

  ab∗ ：	2.07 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Platine-zu-Platine-Steckverbinder für rechtwinklige Verbindungen mit 1 mm Rastermaß, Serie FX5

  HIROSE ELECTRONIC

  A board-to-board connector for perpendicular connection. Equipped with 2 header heights to choose from, 2-stage sequence construction, and a large, inviting form.
  
  [Features]
  · Number of pins, header-side height: 2 types.
  · 2 header types: low-back and high-back, are provided for variation in pin number when connecting to HDD, FDD, CD-ROM, and other units, as well as for variation in mating height.
  · 2-stage sequence construction: the mating sequence has been constructed in 2 stages to protect the end unit.
  ·Fit guiding: With a ±1 mm self alignment, large guiding volume for easy mating, and guide ribs, mating is easily achieved.
  ▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.
  ▪Miniaturization: Mounting area has been reduced by approx. 30% compared to prior half pitch connectors (1.27-mm pitch).

  • Mengenrabatt

  ab∗ ：	2.14 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder für unterseitigen Eingang mit 2,54 mm Rastermaß, Serie MDF-7

  HIROSE ELECTRONIC

  With the 2.54-mm pitch bottom entry connector and circuit board height can be set freely. Also able to be connected with IPM and IGBT.
  
  [Features]
  ▪ Circuit board gap dimensions can be set freely: With the header pin pass-through type construction and a number of header variations, circuit board gap dimensions can be set outside of predetermined levels.
  ▪ Unified part loading surface: 2 circuit board part loading surfaces can be oriented in the same direction while facing each other.
  ▪ Rich variation: single-array, double-array, and tin/gold plating available.
  ▪ In addition, we provide headers that conform to all circuit board gap dimensions for compatibility with items outside the catalog. Feel free to discuss further details with us.

  • Mengenrabatt

  ab∗ ：	0.50 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stiftleiste mit 2,54 mm Rastermaß (Klemme mit 1 Reihe) , Serie A2

  HIROSE ELECTRONIC

  2.54-mm pitch pin header terminal 1 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
  
  [Features]
  · High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
  · Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
  · Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF3H (receptacle) for a wide range of use.

  • Mengenrabatt

  ab∗ ：	0.37 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Vertikale Verbindungszapfen-Stiftleiste mit 2,5 mm Rastermaß, Serie MDF14A

  HIROSE ELECTRONIC

  [Features]
  ■ For low-cost vertical board mounting with no reseating necessary
  · Post header specially designed for vertical board mounting with no reseating necessary.
  · Low-cost connection provided by a combination receptacle and plug design.
  ■ Current capacity: 5A
  · ø0.8mm round post pins provide extra strength and enable current capacity of 5A.
  ■ Temporary board fixing mechanism
  · Kinking keeps boards temporarily in place.
  ■ Pin-out specifications
  · Compatible with a variety of pin-out specifications.

  • Mengenrabatt

  ab∗ ：	0.33 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stiftleiste mit 2 mm Rastermaß (Klemmen mit 2 Reihen) , Serie A3

  HIROSE ELECTRONIC

  2-mm pitch pin header terminal 2 row type. Allows for even higher precision installation.
  
  [Features]
  · Small, high-density mounting: A small, lightweight design enables high-density mounting.
  · Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
  · Product variation: In addition to dip types, there are SMT and crimp types, and thus a wide array of variations is provided.
  · Stacking variation: When used board-to-board in combination with the A3B pin header, the distance between the boards can be set to 6 mm, or 5.2 mm when used in combination with the A3C pin header.
  In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.

  • Mengenrabatt

  ab∗ ：	0.68 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  PC-Karten-Anschluss, kompatibel mit CardBus, Serie IC11S

  HIROSE ELECTRONIC

  A PC card connector compatible with CardBus based on PC Card Standards. Select from mount direction, eject button, and stand-off variations.
  
  [Features]
  · PC Card Standard: Ground plate equipped with 8 connection ground points.
  ·Signals can be accelerated by using a PC card compatible with CardBus through this configuration.
  · Compatible with Type I, Type II, and Type III cards.
  · Includes terminal for ground clip.
  · Space efficient: designed to also have a shallower depth, thereby reducing the required circuit board area.
  · Further, POP-UP version 2 has a reduced pattern restriction area compared to version 1.
  · Lowered height: Usable with thin-type sets due to a lowered height of 5.6 mm.
  · High-performance eject mechanism: The eject mechanism uses a 2 point terminal push ejection mechanism to allow smooth card removal.
  · Independent ejection mechanism used for easy removal of multiple high-output cards.
  · Many variations: with many variations, a type that matches to a particular set can be selected.
  · Choose from a standard type that mounts to the front of a circuit board, or a reverse type that mounts to the back.
  · The types of eject button are arranged from left to right: rigid, turnable, and POP-UP.
  · Standoff attachment is provided to allow parts to be mounted to the bottom portion of the connector.
  · Lighter weight: Sets can be lightened, as this connector is 12.7 g lighter than normal types.
  · Also, POP-UP version 2 is approx. 12% lighter than version 1.

  • Mengenrabatt

  ab∗ ：	6.24 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN10

  HIROSE ELECTRONIC

  This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.

  • Mengenrabatt

  ab∗ ：	1.80 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rückseitiger Steckverbinder Serie NX für E / A-Karten

  HIROSE ELECTRONIC

  These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
  
  [Features]
  • Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
  • Shell is metal: A metal shell was used for better shielding.
  • Structured so that the metal shell always touches before the contacts do.
  • Full ESD shielding: A cover over the mold provides full ESD shielding.
  • Locks securely: An inner lock makes locking more secure.
  • Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
  • Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.

  • Mengenrabatt

  ab∗ ：	6.16 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder / Steckverbinder für interne Stromversorgung, Baureihe DF60 (45 A-Support, 10,16 mm Raster)【1-100 Stk. pro Packung】

  HIROSE ELECTRONIC

  Maximum 45A. 10.16-mm pitch. This high power connector for large currents is the smallest size in its class.

  • Mengenrabatt

  ab∗ ：	2.94 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  FunctionMAX Platine-zu-Platine-Steckverbinder, Serie FX18

  HIROSE ELECTRONIC

  0.8mm pitch. This is the basic series that is central to the FunctionMAX range. Selection is easy from the wide range of options, and the product is very user-friendly.

  • Mengenrabatt

  ab∗ ：	8.91 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...